[calfroper_06]

i had the exact same problem with mine, the brights work and so did the wipers but no turns signals. replaced bulbs, both flashers,(ones under the dash around the column on mine, and the others in the fuse panel). I check for power coming to the turnsignals and it was getting there just was coming out the other side when on.

So i broke down and bought one off ebay for like 125 or so and put it in and still nothing, similiar to you. What happen was someone hooked the powerwire coming into connector in the wrong little hole. i looked and the taps coming out of the turnswitch and stuck the wire in the connector to go on the correct tab, and now it works like new. i probly wasted a 120 bucks on a new switch but now i can read everything on it