There is a torque spec for the manifold bolts, but like you mentioned, it will be quite difficult getting a torque wrench on all the bolts/studs.
It's 25Nm or 18ft/lbs for the V-8.
I tightened mine down & did not use a torque wrench. I've gone back twice & checked for tightness & have not had any loosen up.
__________________
2006 Torch Red GT/Manual
JLT2 CAI w/Brenspeed 93 Tune
CDC Classic Chin Spoiler,MGW Shifter
Moss Tailight bezels w/Rear blackout panel
Vista/MRT Rear Louvers,Magnum Wheels
Black C-Stripes,Sequentials,Shaker
GT-500 Pedals & CS Shifter Bezel
O/R H,GTA's,OBX L/T's
|