MustangForums.com - View Single Post

03sixbanger · 01-10-2009, 10:41 AM

if you just want 300hp to be happy, than you can just slap it on and get tuned and go.

as far as meth with this setup, i wouldnt do it. i would instead, use the stock blower pulley and a UDP to lower you boost. with that, this would happen....

lower boost
lower boost = less heat
less heat = more room for more aggressive tune

so in turn, lower boost could end up meaning more power

01-10-2009, 10:41 AM	#24
03sixbanger Ryan's Backup Mod 2003 Ford Mustang Join Date: Jul 2006 Vehicle: 2003 Mustang Cobra Location: Lafayette,TN Posts: 3,290	if you just want 300hp to be happy, than you can just slap it on and get tuned and go. as far as meth with this setup, i wouldnt do it. i would instead, use the stock blower pulley and a UDP to lower you boost. with that, this would happen.... lower boost lower boost = less heat less heat = more room for more aggressive tune so in turn, lower boost could end up meaning more power __________________ 2003 Oxford White Cobra #3328 of 8394 Apten ported m112, 2.93, 6lb lower, Metco idlers, JLT Pipe, SCT 90mm MAF, 60lb injectors, Kenne Bell Boost-a-Pump, Mac Longtubes, Flowmasters, Evenflow cooling mod, LFP Dual pass heat exchanger, MGW short throw, Cobra Bob's Shifter Gasket Eibach Pro-kit, UPR SFC's, Billetflow IRS Brace, UPR clutch quadrant and firewall adjuster www.tnmustangclub.com