MustangForums.com - View Single Post

Jerome99 · 01-20-2009, 06:50 PM

I have a set of 4 lug Weld Racing Draglite Wheels 15x3 and15x8, near perfect no curb rash but they could use a polish I don't like them on the street to many curves and rain here. The back tires are good BFG Radial t/a street tires w/ about 2k miles and 2 burnouts on them, the front tires are good they have about 40% left

Here are the pics:
http://www.flickr.com/photos/jerome_...7612756485981/

looking to trade for a set of 4lug Cobra R's, 93 cobra, or almost any other 4lug aftermarket wheel with decent tires. Will sell for $400 obo

Items located in Little Rock AR 72202, I'm not sure what they weigh but they are lots lighter than oem wheels.

01-20-2009, 06:50 PM	#1
Jerome99 1st Gear Member 1989 Ford Mustang Join Date: Jul 2008 Vehicle: 1989 Ford Mustang GT Location: AR Posts: 124	Weld Racing Draglite Wheels 4 lug I have a set of 4 lug Weld Racing Draglite Wheels 15x3 and15x8, near perfect no curb rash but they could use a polish I don't like them on the street to many curves and rain here. The back tires are good BFG Radial t/a street tires w/ about 2k miles and 2 burnouts on them, the front tires are good they have about 40% left Here are the pics: http://www.flickr.com/photos/jerome_...7612756485981/ looking to trade for a set of 4lug Cobra R's, 93 cobra, or almost any other 4lug aftermarket wheel with decent tires. Will sell for $400 obo Items located in Little Rock AR 72202, I'm not sure what they weigh but they are lots lighter than oem wheels. __________________ BIG BLOB-O-MODS: TFS cam, World Windsor Sr. Heads, , Omega 1.7 rrs,Typhoon EFI, Edelbrock 70mm TB, 24lb injectors, 76 mm MAF, Aeromotive Adjustable FPR, MSD 6al, blaster coil, MSD billet TFI distributor, Mallory wires. built T5, 3.73 gears, jetted for 150hp, LT headers, GMS tubular K-member, front coil-overs, flaming river quick ratio manual rack, Maximum motorsports bolt-in 4 pt roll bar, egr eliminator, MSD digital nitrous window switch.