MustangForums.com - View Single Post - DANG!! i ordered cam / springs / locks but forgot retainers.. can i use stock ones?

F150 StrokerCobra · 02-05-2009, 09:43 PM

its a custom cam from comp cams

Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 224
Duration at 050 inch Lift: 218 int./224 exh.
Advertised Intake Duration: 270
Advertised Exhaust Duration: 276
Advertised Duration: 270 int./276 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.512 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.512 in.
Valve Lift with Factory Rocker Arm Ratio: 0.512 int./0.512 exh. lift
Lobe Separation (degrees): 110

its basicly the 35-351-8 cam with a lower LSA 4 degrees lower

these are the springs i have and locks

http://store.summitracing.com/partde...art=CCA-986-16

http://store.summitracing.com/partde...+&autoview=sku

FYI its an 1996 Explorer 5.0Ho

02-05-2009, 09:43 PM	#3
F150 StrokerCobra 2nd Gear Member Join Date: Sep 2008 Location: Oranjestad, Aruba Posts: 199	its a custom cam from comp cams Intake Duration at 050 inch Lift: 218 Exhaust Duration at 050 inch Lift: 224 Duration at 050 inch Lift: 218 int./224 exh. Advertised Intake Duration: 270 Advertised Exhaust Duration: 276 Advertised Duration: 270 int./276 exh. Intake Valve Lift with Factory Rocker Arm Ratio: 0.512 in. Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.512 in. Valve Lift with Factory Rocker Arm Ratio: 0.512 int./0.512 exh. lift Lobe Separation (degrees): 110 its basicly the 35-351-8 cam with a lower LSA 4 degrees lower these are the springs i have and locks http://store.summitracing.com/partde...art=CCA-986-16 http://store.summitracing.com/partde...+&autoview=sku FYI its an 1996 Explorer 5.0Ho __________________ --==Jurgen==-- Under Construction: 1989 F150 reg cab longbed 5.0 HO, Comp custom cam 0.18/0.24 @0.50 0.513Lift , Flowtech LT's, hooker aero chambers, GT40 heads, Edelbrock Air Gap Performer intake, Holley 650dp Carb,