MustangForums.com - View Single Post - how hard is it to swich a 4cyl with a 5.0

jimbos99cobra · 02-14-2009, 01:04 AM

it would so much more then a motor... front suspension,cooling,electronics,accesories,transmis sion, brackets, mounts, hoses yada yada yada.. your best option would be to sell yours and purchase a 5.0 If you have to swap for whatever reason try to find a 5.0 that was in a rear end wreck. park them both next to each other and start swapping.. oh also make sure you plan on having the jacks,lifts, pullers and specialty tools to do the swap.

02-14-2009, 01:04 AM	#8
jimbos99cobra Join Date: Feb 2009 Vehicle: 1999 Cobra Location: Fl Posts: 30	it would so much more then a motor... front suspension,cooling,electronics,accesories,transmis sion, brackets, mounts, hoses yada yada yada.. your best option would be to sell yours and purchase a 5.0 If you have to swap for whatever reason try to find a 5.0 that was in a rear end wreck. park them both next to each other and start swapping.. oh also make sure you plan on having the jacks,lifts, pullers and specialty tools to do the swap. __________________ 99 Cobra 2001 motor Steeda CIA Edelbrock 62mm TB 3" X Pipe Flowmasters Eaton Locker 3:73??