MustangForums.com - View Single Post - X-Charger Tools/Items

ODDYSEY · 03-10-2009, 02:22 PM

Ok I have gone through and gathered all the items listed to install the x-charger, but I am having some issues with a few things.

Torx T20 socket or bit - Dave mentioned on certain 07 models this isn't needed?
Torx T30 socket or bit - Dave mentioned on certain 07 models this isn't needed?
E8 inverted Torx socket - I think this falls under the same category as above?
1 1/16 crowfoot wrench - I checked 5 places and couldn't find this, is it really needed?
teflon paste thread sealer (Permatex 80632) - I remember seeing where someone says this is terrible and just get the teflon tape?
trim adhesive (3m 08031) - can't seem to find this either....

Suggestions on any of the above? X arrives tomorrow and I have setup an install party for Saturday, we will take pictures and video, but not sure if we will be as cool as afixer to do a webcast :P

03-10-2009, 02:22 PM	#1
ODDYSEY 4.0L Section Moderator 2007 Ford Mustang Join Date: Aug 2007 Location: Houston, TX Posts: 3,780	X-Charger Tools/Items Ok I have gone through and gathered all the items listed to install the x-charger, but I am having some issues with a few things. Torx T20 socket or bit - Dave mentioned on certain 07 models this isn't needed? Torx T30 socket or bit - Dave mentioned on certain 07 models this isn't needed? E8 inverted Torx socket - I think this falls under the same category as above? 1 1/16 crowfoot wrench - I checked 5 places and couldn't find this, is it really needed? teflon paste thread sealer (Permatex 80632) - I remember seeing where someone says this is terrible and just get the teflon tape? trim adhesive (3m 08031) - can't seem to find this either.... Suggestions on any of the above? X arrives tomorrow and I have setup an install party for Saturday, we will take pictures and video, but not sure if we will be as cool as afixer to do a webcast :P __________________ V6 of Fury! - X-Charger #101 - HI-PO Plus 2.8 \| FRPP GTA's \| FRPP 3.73 & T-Lok \| FRPP springs \| Tokico D-Specs \| BMR Panhard \| Razors - 18x9 \| Nitto 555's \| Auto Meter - Nexus gauges \| Shaftmasters aluminum driveshaft \| TCI ratchet shifter \| Moroso tanks \| UPR catch can \| and more... Click here to view the V6 of Fury!