[Devil Wolf]

you need one of the torx bits to get the MAF out of the housing, dont remember which size. torx bits are common, get them from any hardware store.

i *thought* the e8 inverted was optional, iirc it was for a stud on the alternator that i didnt have. i will consult my manual when i get home, you should be able to figure out if you need it or not. i bought a whole set from sears, and it was expensive for something i will never use.

crowsfoot can be purchased online from sears, i didnt find an actual store that carried one. think it was like 28 dollars.

i used teflon tape.

i used spray glue.