Thanks sleeper but that is what I was trying to avoid so I came up with my own little solution. I bought a straight steel line for brakes with the same diameter and flange size. I had to re-use the nut that goes to the radiator because the one it came with was too short. So I i drilled out the old tube in the nut and once I cut the new line to the size that I needed I put the old nut on it and made a couple of 90* bends. Then I used the rubber hose and clamps to mate the new tubing with the old and it worked like a charm! Ill post some pics as soon as it stops raining.
|