MustangForums.com - View Single Post

mtgmike · 03-25-2009, 03:13 PM

I have mine out right now. 94 vert.

The replacement listed at the Danger Zone is the wrong part. It has a plastic body surrounding the gear, and its gear is too shallow. When it is bolted up, you can hear the motor spinning, but it doesnt engage the gear. I am waiting on them to order the one specified for the front door. Trying that one tonight.

Your Mileage may vary, but dont forget to match up the depth of the gear, in addition to the bolt pattern, etc.

I had fun getting the seat bottom out. I could see the buttons to push(small white buttons on white tabs under the center of each seat cushion), but pushing them didnt help at first. I had to push down on the seat while pushing the button, and immediately yank back up.

Buy new plastic push pin thingys. They never hold everything as tight as the first time used.

03-25-2009, 03:13 PM	#3
mtgmike Join Date: Mar 2009 Vehicle: 1994 Ford Mustang Vert Location: Republic Of Texas Posts: 1	I have mine out right now. 94 vert. The replacement listed at the Danger Zone is the wrong part. It has a plastic body surrounding the gear, and its gear is too shallow. When it is bolted up, you can hear the motor spinning, but it doesnt engage the gear. I am waiting on them to order the one specified for the front door. Trying that one tonight. Your Mileage may vary, but dont forget to match up the depth of the gear, in addition to the bolt pattern, etc. I had fun getting the seat bottom out. I could see the buttons to push(small white buttons on white tabs under the center of each seat cushion), but pushing them didnt help at first. I had to push down on the seat while pushing the button, and immediately yank back up. Buy new plastic push pin thingys. They never hold everything as tight as the first time used. Last edited by mtgmike; 03-25-2009 at 03:15 PM.