4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

2009 4.6 Timeslip Thread

Thread Tools
 
Search this Thread
 
Old Mar 26, 2009 | 07:58 PM
  #11  
tim2002gt's Avatar
tim2002gt
3rd Gear Member
 
Joined: Aug 2007
Posts: 670
From: Tulsa, OK
Default

Originally Posted by lilc1511
nice, no suspension mods? good run! what were you making for power? im excited now! just got my window switch and some suspension parts and i will have a good tune this year.
congrats. what rpm did you launch at?
Yes, I do have Steeda weight-jacker LCA's. Though they aren't ideal for drag racing, but better than stock for sure. Also frpp "c" springs. I put down 374rwhp and 460rwtq on the 125shot. I was launching around 4k.

Thanks for the compliment!
Old Mar 27, 2009 | 06:24 PM
  #12  
01GT4.6's Avatar
01GT4.6
Thread Starter
6th Gear Member
 
Joined: Mar 2007
Posts: 5,726
From: Slidell, Louisiana
Default

Originally Posted by sstang
You will need to post again, but I'm pretty sure g-tech numbers do not count. Wait for the real track then post.
you are correct.
Old Mar 31, 2009 | 09:35 PM
  #13  
ddmsgtr1's Avatar
ddmsgtr1
4th Gear Member
 
Joined: May 2008
Posts: 1,236
From: NJ
Default

'02 GT
N/A
60' - 2.231
1/8 - 8.991 @ 80.33
1/4 - 13.85 @ 101.38

First night on the Nitto DR's, trying to figure out what they like (horrible 60's). 4.10s and the 31 spline going in tomorrow.
Old Mar 31, 2009 | 09:57 PM
  #14  
01GT4.6's Avatar
01GT4.6
Thread Starter
6th Gear Member
 
Joined: Mar 2007
Posts: 5,726
From: Slidell, Louisiana
Default

Originally Posted by ddmsgtr1
'02 GT
N/A
60' - 2.231
1/8 - 8.991 @ 80.33
1/4 - 13.85 @ 101.38

First night on the Nitto DR's, trying to figure out what they like (horrible 60's). 4.10s and the 31 spline going in tomorrow.
you need suspension. I went a 1.60 on nittos.
Old Apr 1, 2009 | 03:16 PM
  #15  
ddmsgtr1's Avatar
ddmsgtr1
4th Gear Member
 
Joined: May 2008
Posts: 1,236
From: NJ
Default

Yes I do, but I think I'll need a clutch first. I ran a 2.08 on streets before though, so I know I can pull at least a 1.9 with the setup as is. Anybody ever try foot braking a manual to load the suspension?
Old Apr 2, 2009 | 01:04 AM
  #16  
waggs's Avatar
waggs
3rd Gear Member
 
Joined: Jan 2007
Posts: 508
From: Phoenix, AZ
Default

my times suck but i figured i'd post them anyway lol.
'03 GT n/a
60'-------2.29
330'------6.14
1/8-------9.2
mph------80mph
1000'-----92mph
1/4-------14.03
mph------102mph
Old Apr 3, 2009 | 04:13 PM
  #17  
Blownsvt's Avatar
Blownsvt
5th Gear Member
 
Joined: Jul 2006
Posts: 2,407
From:
Default

heres one of mine. kinda slow but it is what it is.

Old Apr 3, 2009 | 07:24 PM
  #18  
01GT4.6's Avatar
01GT4.6
Thread Starter
6th Gear Member
 
Joined: Mar 2007
Posts: 5,726
From: Slidell, Louisiana
Default

Originally Posted by Blownsvt
heres one of mine. kinda slow but it is what it is.

nice time but wrong date. 2008 has ended, sorry.
Old Apr 6, 2009 | 08:47 AM
  #19  
pikuoff's Avatar
pikuoff
2nd Gear Member
 
Joined: Aug 2005
Posts: 366
From: Rockville, MD
Default

Popping my drag racing cherry:

2001 Mustang GT
4.6L V8 2V
N/A
60ft : 1.985
1/8 mile et : 8.880
1/8 mile mph : 77.76
1/4 mile et : 13.720
1/4 mile mph : 102.15


Last edited by pikuoff; Apr 6, 2009 at 09:10 AM. Reason: Posted timeslip
Old Apr 11, 2009 | 12:37 AM
  #20  
tim2002gt's Avatar
tim2002gt
3rd Gear Member
 
Joined: Aug 2007
Posts: 670
From: Tulsa, OK
Default

Ran a new best tonight! Not much quicker than my previous best, but its getting there.

I was in the right lane...



All times are GMT -5. The time now is 11:34 PM.