MustangForums.com - View Single Post

AdderMk2 · 04-06-2009, 07:40 PM

I really wish I still had the dyno sheets... The engine was factory stock, had the above mentioned mods and a 70mm tb, and a set of UDP's

after about 3 weeks of tuning with my wideband and tweecer I went back and ran the car again. Made like 12 runs. and managed the 276hp with fuel and timing.

its amazing how much power you can find when you go from 15.5:1-13:1 afr's
I ran so lean on the dyno when I made the 253hp passes that the dyno op didnt even want to let me run!

04-06-2009, 07:40 PM	#14
AdderMk2 MF Attention Whore Join Date: Dec 2005 Vehicle: 1994 Ford Mustang Cobra Location: Rhode Island Posts: 17,855	I really wish I still had the dyno sheets... The engine was factory stock, had the above mentioned mods and a 70mm tb, and a set of UDP's after about 3 weeks of tuning with my wideband and tweecer I went back and ran the car again. Made like 12 runs. and managed the 276hp with fuel and timing. its amazing how much power you can find when you go from 15.5:1-13:1 afr's I ran so lean on the dyno when I made the 253hp passes that the dyno op didnt even want to let me run! __________________ Siggy removed by Administration. ^^^ The Man is trying to oppress me...