USED AFR 165 HEADS (ON BUDGET)
#1
USED AFR 165 HEADS (ON BUDGET)
My Car is a 1988 mustang GT mustang 5.0 and have these mods:
bbk cold air intake, with 70mm throttle body and 70mm spacer 73mmC&L MAF
msd distributer, msd 6al ingnition box, and i tfi msd coil
a billet adj. fuel regulator (30-100 psi), 24lb fuel injectors,
bkk long tube headers
bbk h-pipes w/o cats
flow master 2 chamber exaughst (american Thunder)
cobra intake (i think but it look like a normal one to me)
a rebuilt (i think it is) t-5 short shifter
i've had my dizzy done and set
WOULD THESE HEADS HELP ME OUT? AND WHERE COULD FIND IT
bbk cold air intake, with 70mm throttle body and 70mm spacer 73mmC&L MAF
msd distributer, msd 6al ingnition box, and i tfi msd coil
a billet adj. fuel regulator (30-100 psi), 24lb fuel injectors,
bkk long tube headers
bbk h-pipes w/o cats
flow master 2 chamber exaughst (american Thunder)
cobra intake (i think but it look like a normal one to me)
a rebuilt (i think it is) t-5 short shifter
i've had my dizzy done and set
WOULD THESE HEADS HELP ME OUT? AND WHERE COULD FIND IT
#2
of course they'd help, try ebay or craigs list but no aluminum head is gonna be cheap, expect to spend 900.00 to 1100 for a used aluminum head pending what brand, I have a set of edelbrock rpm 1.90/1.60's for 875.00
#3
how long have you had them and do you still have the reciept because i want to document everything i get for my car
#5
Did you fall down and hit your head on something or did your machinest hold a swinging watch out in front of you for a few minutes? lol
Last edited by Portmaster; 04-17-2009 at 10:13 AM.
#6
If you want a reciept you get it from the person you buy them from stating you bought them used and appox mileage if possible. Getting the recipt from where they were purchaced new falsifies the trure documentation of your build. It would be like me asking the previous owner of my 85 Coupe for the dealer invoice to put in my build records.
#8
#10
There's no way in HELL you will EVER get a set of ported E7's to perform like a good set of aftermarket heads. Granted, a good set of ported stockers can do well, but a good set of aftermarket heads with revised port designs are always going to be ahead of the game. And there's a lot more to making power than just what the head flows after it's been ported.