Bad Throw Out Bearing?
#1
Bad Throw Out Bearing?
I have been having a problem in 5th gear. Around 2500rpms I hear a loud rattling noise coming from the transmission. After I go over 3000rpms it essentially goes away. One of my neighbors, a big ford guy, suggested that it sounds like the throw out bearing. Does this sound like it is the throw out, or is something possibly wrong with the transmission?
BTW, I have gone throw 2 transmissions, and the 3rd cluster gear shattered in my old one.
-Brian
BTW, I have gone throw 2 transmissions, and the 3rd cluster gear shattered in my old one.
-Brian
#5
It makes some noise but it becomes noticeable in 5th gear, I am away at college atm so it is hard to recall everything. But I am positive it makes noise in other gears, but you have to listen very carefully otherwise you wont notice it.
#6
A throwout bearing doesn't care what gear you are in. If there is a noise concerning a throwout bearing. With the engine running try the pedal up, a slight amount of pressure or to the floor. If the noise changes it's throwout bearing or clutch related.
If you shattered a cluster gear for no apparent reason. Check out what I did to my cluster.https://mustangforums.com/forum/memb...2-img-0521.jpg
This is my replacement cluster from TTC. It's a genuine Tremec brand part and the broken one looks very different in quality, finish and colour. New one on the right. Broken imitation on the left.
https://mustangforums.com/forum/memb...3-img-0522.jpg
If you shattered a cluster gear for no apparent reason. Check out what I did to my cluster.https://mustangforums.com/forum/memb...2-img-0521.jpg
This is my replacement cluster from TTC. It's a genuine Tremec brand part and the broken one looks very different in quality, finish and colour. New one on the right. Broken imitation on the left.
https://mustangforums.com/forum/memb...3-img-0522.jpg
#9
Thread
Thread Starter
Forum
Replies
Last Post