heres what i bought so far
rotating assembly
http://store.summitracing.com/partde...E&autoview=sku
scat 347 forged rotating assembly
Jackson Timing Gears,procomp 1.6 roller rockers, Procomp aluminum heads 210cc runners and 60cc chambers, mac ceramic shorty headers, full custom 2 1/2 exhaust, holley contender intake manifold, edelbrock 624 cfm carb, 73 block .30 over, electric fans, aluminum radiator, aftermarket oil pan, UPR tubular k-membr,
heres what im looking to know, what is a good street strip cam for this setup and what length pushrods do i want, the car needs to be very driveable it has a c4 auto built to handle 400 hp so thats no issue its got a 2k stall speed in it and 3.73 gears im lookin for something with a nice idle but still makes good low end power i dont rev the car way up usually never higher than 5k so let me know what you think and what you think itll have for power thanks