View Single Post
Old 05-26-2009, 05:21 AM   #123
mygt500
Multi-Tasking Moderator!
 
mygt500's Avatar
 
Join Date: Nov 2006
Vehicle: 2006 Ford Mustang GT
Location: Detroit Rock City!
Posts: 14,013
Default

I love the HID's! they work flawlessly and have no spraying of light upward. No issues with install and true plug and play. Very easy even without instructions.
here is a link to install with some pics but it is easy as positive and grounds......done

this member bought them from another sponsor but they are the exact same connectors and look almost identical but different manufacturers.....
http://mustangforums.com/forum/stang...6k-no-way.html

Where it says to use the stock red rubber washers that were with the stock bulbs I found that it was too much washer and way too tight for my application and cut one of the red washers in half and used the halves to get the right amt of tension to hold the bulbs in place firmly to the housing on either side. I did not want to break anything and this seemed to work better for my car.

Thanks again retro I wish I bought them sooner and yours are so much cheaper then all the other sellers I have seen.......but of the same or better quality.........that is very sweet indeed......love it!
__________________

2006 Mustang GT with Cervinis Kit
Whipple Crew member
H.O. S/C 465 RWHP and 440RWTQ

First online article about my car! check it out!
http://www.examiner.com/examiner/x-8811-Detroit-Sports-Car-Examiner~y2009m5d30-Jason-McGuires-2006-Mustang-GT

http://www.cardomain.com/ride/3342086

www.mocsem.com
mygt500 is offline   Reply With Quote