MustangForums.com - View Single Post - Ok now with all correct info, looking for opinions

John Doev1 · 05-31-2009, 05:55 PM

I'll say this again but nobody will read it because it's me and the post is not going to be a novel. I just bought a set of GT40P's for $175 and I plan on porting, doing some bowl work, and running larger unshrouded valves. I am stepping to a custom cam and a stall that is around 2000 to 2400rpm.

05-31-2009, 05:55 PM	#62
John Doev1 1st Gear Member Join Date: Mar 2009 Vehicle: 90 LX Notch 5.0 Location: South Eastern U.S. Posts: 87	I'll say this again but nobody will read it because it's me and the post is not going to be a novel. I just bought a set of GT40P's for $175 and I plan on porting, doing some bowl work, and running larger unshrouded valves. I am stepping to a custom cam and a stall that is around 2000 to 2400rpm. __________________ 88 LX Notch, 302 Edlebrock Performer RPM, Holley 750, Hooker long tubes, 3 inch O/R X pipe w/flowtech 3 inch in/out 2 chambers, TFS 1 cam, ported E7's, Detroit locker, 3.73's.