MustangForums.com - View Single Post - Has anyone modified hoodscoop on Mustang GT?

StriderTacticaL · 06-04-2009, 03:30 AM

Stuff like this have been asked about many times but I did remember asking if it would be possible to fabricate some kind of ducting that goes along the underside of the hood and routes to the air filter.

Some guy replied saying he bought a one off kit from some guy on ebay and he sent me some pics and it looked pretty well done. He sent them by email and I just checked them but for some reason the pics aren't showing anymore.

It was basically designed like the GT500KR hood except on a 99-04 hood with the factory scoop...if you can imagine that.

If you want your engine cooler then I think you'd better off doing some cooling mods and get a CAI and/or get a heat extractor hood

06-04-2009, 03:30 AM	#4
StriderTacticaL 4th Gear Member Join Date: May 2008 Vehicle: '04 Mustang GT Location: Santa Monica, CA Posts: 1,339	Stuff like this have been asked about many times but I did remember asking if it would be possible to fabricate some kind of ducting that goes along the underside of the hood and routes to the air filter. Some guy replied saying he bought a one off kit from some guy on ebay and he sent me some pics and it looked pretty well done. He sent them by email and I just checked them but for some reason the pics aren't showing anymore. It was basically designed like the GT500KR hood except on a 99-04 hood with the factory scoop...if you can imagine that. If you want your engine cooler then I think you'd better off doing some cooling mods and get a CAI and/or get a heat extractor hood __________________ 04 GT K&N FIPK, Accufab 75mm TB & Trickflow plenum, Bassani SS catted X, Borla Stingers, 31 spline T-Lok w/Moser axles, FRPP 4.10's, Hurst billet/plus, MM XD LCA's, MM XL FLSFC, Cobra brakes, Sniper tuned. Last edited by StriderTacticaL; 06-04-2009 at 03:32 AM.