MustangForums.com - View Single Post

Rubrignitz · 06-02-2009, 06:39 PM

For you guys that are considering a rear cover with drain holes... I've been holding off on my fluid swap until I found the perfect cover and there only seems to be one kind that allows for the use of the stock location panhard bar, LPW http://www.lpwracing.com/. They are also sold by Steeda. I really didn't want to have to relocate my panhard bar and this seems to be the ticket to a drain-hole cover w/o relocation bracket for the panhard. I ordered one this week. Just thought I would add that info to this great how-to thread. I also vote this one a sticky. Great pics and writeup! And a nice clean undercarriage helps

.

06-02-2009, 06:39 PM	#23
Rubrignitz 5th Gear Member 2007 Ford Mustang Join Date: Jul 2007 Vehicle: 2007 Mustang GT Coupe Location: TX Posts: 4,147	For you guys that are considering a rear cover with drain holes... I've been holding off on my fluid swap until I found the perfect cover and there only seems to be one kind that allows for the use of the stock location panhard bar, LPW http://www.lpwracing.com/. They are also sold by Steeda. I really didn't want to have to relocate my panhard bar and this seems to be the ticket to a drain-hole cover w/o relocation bracket for the panhard. I ordered one this week. Just thought I would add that info to this great how-to thread. I also vote this one a sticky. Great pics and writeup! And a nice clean undercarriage helps . __________________ 2007 Alloy GT Coupe/MGW shifter/C&L Racer CAI/JBA LT's/JBA catted H/Pypes M-80 race mufflers/Steeda HD engine mounts/LFP 17# driveshaft/FRPP 4.10s/Truetrac/Steeda Ultralite 18x9.5's with 275/40 and 285/40 Nitto NT555/Autometer DPSS shift light and gauges. Suspension: Steeda Comp Springs/GT500 Front CA's with Steeda X5 balljoints/Steeda bumpsteer kit/Tokico D-Specs/BMR adj upper & lower LCAs+relocation brackets/Hotchkis 3/4way adj swaybars/UMI Performance panhard.