swaping wiring harnesses is alot harder than it sounds you have to pull the whole dash out Repining is alot easier than it seems pull wire here put it there pruty much that simple you also have to change the pigtail on the VAM and do a little wiring on the ignition wiring since your 93 is Coiled the 88 had DIS.
on honing the block if you replace the rings make sure they are the right size honing makes the cylinders bigger so you cant go with stock also if you replace the rings then you have to replace the crank bearings other wise the raise in compression in the top end will spin the lower bearings since they are no longer use to the hightend compression just get the whole block checked honing and crank alignment it only costs about $50-100 i got quoted for $75
|