MustangForums.com - View Single Post - 87 Notchback, want to modify engine 400hp range

Notch 8022 · 06-10-2009, 03:12 PM

Folks, I am new to the 5.0 Mustang. I want to modify the engine and keep it street friendly. I have an 87 SSP FHP notch with an 302 H.O. motor. I hear that these motors came with a roller cam stock. I have read an article on car craft that by changing out the heads to AFR's that a 400 horse motor was achieved. I would like to keep my fuel injection but do not know what would be required for it. I really do not want to install a MAF system. Need some help. Has anyone ventured this route? Thanks, Rob

My car currently has the following mods:
Intake spacer
MSD dis.
Crane Cam ing.
Mac cold air intake
flowmaster 40's
bbk shortie headers
posi rearend

06-10-2009, 03:12 PM	#1
Notch 8022 Join Date: Jun 2009 Vehicle: 1987 Location: Florida Posts: 11	87 Notchback, want to modify engine 400hp range Folks, I am new to the 5.0 Mustang. I want to modify the engine and keep it street friendly. I have an 87 SSP FHP notch with an 302 H.O. motor. I hear that these motors came with a roller cam stock. I have read an article on car craft that by changing out the heads to AFR's that a 400 horse motor was achieved. I would like to keep my fuel injection but do not know what would be required for it. I really do not want to install a MAF system. Need some help. Has anyone ventured this route? Thanks, Rob My car currently has the following mods: Intake spacer MSD dis. Crane Cam ing. Mac cold air intake flowmaster 40's bbk shortie headers posi rearend