Quote:
Originally Posted by berndude
Ron, thanks for all the advice!! greatly appreciated!! The T5 is coming out of an 87 GT when you mention the mounting bracket do you mean a different crossmemeber then the one that comes on a 65 with a stick? or?
|
The original cross member is replaced with one made specifically for the swap. You can pick them up from most Mustang dealers or Ebay for about $130-150.
The T5 mounting is about 1 inch farther back than an original.
I went with the Ron Morris type because it gives the most room for exhaust pipes.
__________________
Ron
http://chris66dad.tripod.com/
A code 66 coupe
289 4v, Roller Rockers, Electric fan
Performer & 650 Edelbrock
MSD ignition
Tri Y into 2.25 Shelby side exhaust
T5 conversion
Hydraulic clutch
CSRP Disks