MustangForums.com - View Single Post - Lowering Springs: What else do I need and should I do it myself?

GrayPony · 06-16-2009, 07:05 AM

Do I need shocks and struts to maintain a decent ride quality?
Yes (You also need tires with some sidewall - no rubber bands)

Can I install springs, shocks and struts myself at home (no prior suspension experience)?
Yes, search for a how to or buy a repair manual

Do I absolutely need a spring compressor? (no idea what they look like/cost)
Yes for the front. You can borrow/rent one You'll also need a floor jack and jack stands.
I'm sure someone will chime in, they did it without a spring compressor = unsafe and stupid.

Is it worth it to have it professionally done?
If you have the $$, a shop you trust and can't/don't want to do it yourself.

Do I need a suspension alignment afterwards?
Yes. You may also need an adjustable panhard rod to center the rear axle. If you drop over an inch, you should also check pinion angle.

06-16-2009, 07:05 AM	#3
GrayPony 3rd Gear Member Join Date: Jun 2006 Location: Posts: 977	Do I need shocks and struts to maintain a decent ride quality? Yes (You also need tires with some sidewall - no rubber bands) Can I install springs, shocks and struts myself at home (no prior suspension experience)? Yes, search for a how to or buy a repair manual Do I absolutely need a spring compressor? (no idea what they look like/cost) Yes for the front. You can borrow/rent one You'll also need a floor jack and jack stands. I'm sure someone will chime in, they did it without a spring compressor = unsafe and stupid. Is it worth it to have it professionally done? If you have the $$, a shop you trust and can't/don't want to do it yourself. Do I need a suspension alignment afterwards? Yes. You may also need an adjustable panhard rod to center the rear axle. If you drop over an inch, you should also check pinion angle. __________________ Last edited by GrayPony; 06-16-2009 at 07:08 AM.