[eviligloo]

Originally Posted by Werecow

Reading this forum, I have seen some numbers that are damn close to the 400 rwhp number, but none that I have seen have actually hit it. It would just seem porting the heads should help hit that number.

Hollywood03 is at 405rwhp. I'm at 390 with an ultra conservative tune on a series II blower. If I add a little timing I'm at 400....but it's still stock saleen timing (and I did my dyno run with no cooldown after a 40 minute drive to the dyno).

If you want to see a dyno sheet that says "400" on it, send me a check and I'll go add a degree of timing to my tune and print you one!