[Darren05]

Contact brenspeed and see what they say. make sure you are driving your car around for a day or so after you load a tune on your car before you go back to have the inspection done otherwise it will keep showing an incomplete. I do not remember what the mileage is that you have to drive around before the computer will pass the inspection after you change your tune. It is the same if you disconnect your battery. If you do that and then try to pass inspection it will not pass, something with the computer. If all fails, put your stock program back on your car to pass the inspection, if all you have done is the cold air intake it will be fine. That is what I did the first time I had to get an inspection, and I had a high flow cat H-pipe on mine at that time.