MustangForums.com - View Single Post

SilverNGrey4.6s · 06-24-2009, 10:32 AM

It go's on the outside, you can just slap it on there and hope its even and you dont have any air bubbles. Or you can get a spray bottle and put a drop of soap in to it and fill it with water. Then spary the brake light down with it, and then put the tint overlay on. Now you can make sure its even, and squeegee all the air bubbles out and let dry.

06-24-2009, 10:32 AM	#2
SilverNGrey4.6s 4th Gear Member Join Date: Nov 2008 Vehicle: 02 Ford Mustang GT and 03 Crown Victoria PI Location: austin,TX Posts: 1,055	It go's on the outside, you can just slap it on there and hope its even and you dont have any air bubbles. Or you can get a spray bottle and put a drop of soap in to it and fill it with water. Then spary the brake light down with it, and then put the tint overlay on. Now you can make sure its even, and squeegee all the air bubbles out and let dry. __________________ 2003 Grey Crown Victoria Police Interceptor the DD stock 2002 Silver Mustang Gt not stock JLT Cold air intake Accufab 75mm Throttle Body & Plenum Mac longtube headers Dr.Gas o/r x SLP Loudmouth 1 3.73 gears Steeda tri ax short shifter H&R sport springs Tokico HP Shocks & Shruts 18x9/18x10 Black chrome bullitt rims SCT Xcal 2 tuner done by JMS Chip and perf. http://Centraltexasstangs.com