[STANMAN]

So, good news 1st, I ran a new best 1/4 last night, 12.2@117.8, but the bad news is I am still cutting 1.8 60'. With the mods I have I feel I should be cutting WAY better 60's, but if I leave harder than 3K, it just blows the tires off. I run the car full weight. Car puts 470 to the tire with a Saleen running 9lbs of boost, is a 5 speed, running 18lbs of air in 305/45/18 Mickey ET Streets doing a decent burnout (I know the Mickeys don't need to be heated much):

Torque box braces (Steeda)
Adjustable LCA's with LCA relocation brackets (BMR)
Adjustable UCA (BMR)
Adjustable panhard bar (BMR)
FRPP 4.10's
Moser 31 spline axels
Detroit Tru-trac
Tociko Adjustables set full hard in front, full soft in back (also tried 2 off from full soft in back, no help)


What do you guys think? I mean I hear of guys running 12.3 N/A, so a 12.2 with a blower car makes me want to cry a little bit.