[fs308]

Originally Posted by 70torino429

Ok guys, building up a 351 motor for 99% street useage. I want to drive it everyday.

Heres the combo im proposing.

stock 351 block, w/ trickflow main girdle
forged KB pistons
forged I-beam rods
AFR 185 heads (get at least the 205's if you stick with afr)
GT40 lightning intake, or trickflow r series intake (which do you think would be a better fit?) (obviously the R intake is the better choice)
TFS stage I cam, (any other cams i should be considering?) is this a joke?
all the best hardware, arp bolts etc.
42lb injectors (id say 60's}
And this will all get fed by anywhere between 5-15psi (ill probably start off with low boost and work my way up.) out of a vortech centrifugal unit.
I was thinking of using an air to air intercooler, or would a meth injection kit be a better choice?


This will be backed by a TKO 5 speed trans.

Looking for opinions on this, what do you guys think of it? Any of these parts a mismatch? or any parts that should be changed out for different ones and why?

Im looking to make about 450-500ish hp at the crank.

read bolded