MustangForums.com - View Single Post

matpat · 07-01-2009, 06:25 PM

i`m pretty newbie in mecanic so can you explain me what s the vaccum line and to torque the intake.

That s what i did.
i take off the fuel rail by taking out the two bolt.After i replace one by one the 19 pounds inecjector for the 24 pounds injector so the sensor are all at the same place. (are the injector have a specific place or they can go in of the the 8 holes.)
I put back my fuel rail on the injector and i hit it with a robber hammer.
I put the key in the ignition and I prime the line I went to see if there was any leak but nothing was leaking.
i didn t start the car because the tb and the maf was not instal yet.

07-01-2009, 06:25 PM	#7
matpat Join Date: Jun 2009 Vehicle: lx 1990 Location: vermont Posts: 21	i`m pretty newbie in mecanic so can you explain me what s the vaccum line and to torque the intake. That s what i did. i take off the fuel rail by taking out the two bolt.After i replace one by one the 19 pounds inecjector for the 24 pounds injector so the sensor are all at the same place. (are the injector have a specific place or they can go in of the the 8 holes.) I put back my fuel rail on the injector and i hit it with a robber hammer. I put the key in the ignition and I prime the line I went to see if there was any leak but nothing was leaking. i didn t start the car because the tb and the maf was not instal yet.