View Single Post
Old 07-02-2009, 05:09 PM   #4
enfausn
1989 Ford Mustang
 
Join Date: Jul 2009
Vehicle: 1989 Mustang LX
Location: PA
Posts: 24
Send a message via Yahoo to enfausn
Default

Thanks for the info on the throttle body......I'll give that a try tomorrow. I ran the test and this is what I got. This is the first time i've ever done one of these so bear with me...LOL. I think I got a 22 code on the KOEO test and a 23 on the stored codes part. It didn't flash at first then went flash, quick pause, flash, pause, flash, quick pause, flash, longer pause, flash, long pause, then repeated the 22. (Pretty sure that's 22 right?) After starting it it flashed 23 once. I hit WOT to start the balance test and got four numbers 7, 6, 7, 7. I looked up the codes and They are for the MAP sensor and TPS voltage. So, I'm going to adjust the TPS like I've seen in other threads, check the MAP and clean the throttle body tomorrow. Gotta look up balance test codes but think I'm on the right track. Thanks for the info guys!
__________________


89 LX 5.0 Notchback - MSD StreetFire coil, Ford Racing Wires, Accel Ignition Module, BBK CAI, Summit 75mm MAF, A/C Delete

Last edited by enfausn; 07-02-2009 at 05:13 PM.
enfausn is offline   Reply With Quote