Quote:
Originally Posted by cominus
Will this work on my V6, I mean the connections and all, and is this everything included?
|
It will work just fine... everything is included and was left as is. You could follow the instructions that came with the kit and install it without hitch.
As far as electrical connections are concerned, there are only a couple...
Positive and negative which runs through the switch (with a fuse, also already there), and one wire connects to the signal wire on your TPS - for the WOT switch. I am not sure which wire you need to tap but I can find out using my friend's 00 v6.
Apart from that you need to get fuel to it, there is a kit zex has which lets you use the schrader valve on your fuel rail... I don't have it - it didnt come with my kit and my fuel rails dont even have a schrader valve. You can also cut and put a t-fitting into the fuel line. SOunds scary but it isn't bad.
So yes, it will work just fine, everything is here, or I could help you locate extras to make it simpler. All connections will be simple
Excuse any typos... typed this up from my phone.