R&D Machine Shop in Kenner, LA
I don't want this to sound like a promotional ad but i've been searching like crazy to find a reputable machine shop in the new orleans area to prep my 351w block and couldn't find any. Well after months of searching i stumbled across R&D by accident while I was driving by the airport in kenner. As soon as I walked in I knew I was in the right place theres engine blocks covering the shelves and floor. Anyway, I thought i'd share my finding if anyone else is in the N.O. area and needs some machining done. They're currently prepping my 351 roller block for a scat 408 kit I actually ordered through them. I'm looking to make about 700rwhp.
just thought I'd add my .02
there number is (504)305-3203 located at 1317 Carroll St. in Kenner off Vets by the airport.
__________________
92 tbird 408 turbo 5spd Borg Warner S475mm 1.1AR T6
Tial 44mm w/g @ 11psi tial alpha q bov
8.7:1 RHS heads 2.08I, 1.6X, 64 c/c, 215-I/66-X
Comp Cams 1.6 RR's F303 Cam 226 @ .05, .512 lift
80# injectors, Edelbrock Super Victor EFI intake & elbow
90mm LMAF w/ Mafia Xpander
75mm t/b 4x12x31 intercooler w/ 1200cfm fan
LC1, QH, BE, T4M0-CBAZA
mustangs race camaros
tbirds race vettes
Last edited by decipha; 07-12-2009 at 05:17 PM.
Reason: i finally found there contact info
|