Pulled a P0171 code day after cam install
well I went out to look for any vacuum leaks because my car is idling so low and could not see or hear any but while the car was idling it pulled a P0171 CEL...did a little researching and it is a LEAN code for cylinder bank 1. Caused by a dirty MAF, vacuum leak, egr not closing properly, etc...has anybody experienced this after a cam install and what do I need to do
__________________
2005 Mustang GT black 5-speed(13.39 at 101.51 stock)
BMR 2in. lowering springs, UPR adj. panhard bar, UPR O/R X-pipe, Flowmaster, JLT CAI w/ BAMA 93 race tune, Vredestein 275/35/18 Front and 295/35/18 Rear and some 26x11.50-17 Mickey Thompson ET Streets for the track
12.76 @ 108.88 Now
New Mods: JBA LT Headers, O/R H-Pipe, FRPP 4.10 gears, CMVC Delete plates, Mutha Thumpr cams w/ Tillman Speed 93 All-Out tune
12.41 @ 107.89
|