MustangForums.com - View Single Post

mooae · 07-05-2009, 08:32 AM

The hard line at the control valve has a few bends. The old line bends around the frame. All the new lines bend into the frame. The new lines have an angle that will not allow installation.

07-05-2009, 08:32 AM	#3
mooae Join Date: Jul 2009 Vehicle: 1967 mustang coup Location: ms Posts: 6	The hard line at the control valve has a few bends. The old line bends around the frame. All the new lines bend into the frame. The new lines have an angle that will not allow installation.