MustangForums.com - View Single Post - mach 1 auto, on a 96-98 cobra engine?

Smokin04 · 07-05-2009, 10:35 PM

The tranny will bolt up fine to the engine.

But you will have other issues. You have to convert to hydroboost. You will also need the entire wiring harness and PCM. Dash removal for pedal modifications, and wiring swap, etc...The cross-member will be a little off too, but you can just make a custom one.

07-05-2009, 10:35 PM	#6
Smokin04 2nd Gear Member Join Date: Apr 2009 Vehicle: 2004 SVT Cobra Location: GA Posts: 233	The tranny will bolt up fine to the engine. But you will have other issues. You have to convert to hydroboost. You will also need the entire wiring harness and PCM. Dash removal for pedal modifications, and wiring swap, etc...The cross-member will be a little off too, but you can just make a custom one. __________________ Silver 04 SVT Cobra Twin 57mm Garrett Turbos Full Maximum Motorsports (and QA1) Suspension Huge Brakes Loud Audio 900 HP Daily Driven Boulevard Monster See a full mod list, Dyno Vids and Build Slideshow here:www.fquick.com/smokin04 Just click on the Cobra. "VPR KLR" Last edited by Smokin04; 07-05-2009 at 10:51 PM.