MustangForums.com - View Single Post

HEAVYMETALMATT · 07-06-2009, 06:14 AM

Seeing as the Pypes come in 3 pieces it's not so much the lining up that's difficult. It's keeping it lined as you tighten. The biggest problem I had was that reguardless of how it fits when you tighten it up, it starts to sag in the joint where it meets the cat-back. I gave it a quick fix after I got sick of scraping everything; removed the pressure clamps and welded it.

07-06-2009, 06:14 AM	#7
HEAVYMETALMATT 2nd Gear Member 2001 Ford Mustang My Garage Join Date: Dec 2007 Vehicle: 2001 Cobra Location: Ft. Hood, Tx/Nicoma Park, Ok Posts: 387	Seeing as the Pypes come in 3 pieces it's not so much the lining up that's difficult. It's keeping it lined as you tighten. The biggest problem I had was that reguardless of how it fits when you tighten it up, it starts to sag in the joint where it meets the cat-back. I gave it a quick fix after I got sick of scraping everything; removed the pressure clamps and welded it. __________________ 2001 Cobra 13.03@110 on 275/40-17 Riken Raptors!