Quote:
Originally Posted by Sleeper_08
Thank for the response. I usually remember to turn traction control off but sometimes forget so that might have contributed to the high wear rate. In future I'll try to do a better job of remembering.
My front are probably about the same as yours after about 4 sessions.
This morning I ordered HP+ for the back and a spare set of HP+ for the front. Meanwhile I'm taking public transit until the rear pads are here and replaced  |
Bummer about the public transit... I forgot you have the GT500 front brakes. Maybe there is a bias issue with the brakes. If the switch to the Hawk brakes doesn't work you may want to look into a manual proportioning valve so you can dial in more front bias. That has always been my concern with the big brake kits that switch out fronts only.
Good luck
__________________
Mods: Corsa Exhaust, Steeda: Complete Intake, UDPs, HD Strut Mounts, G-Trac, Panhard Brace & SS Lines, Eibach Pro Kit, Tokico D-Spec, Spohn: Adj. LCAs & Panhard Bar, BMR: UCA & Reloc Brkts, Coast AL DS, Strange STB, Cobalt Friction Pads, ATE Fluid, Quantum Ducts, ARH LTs, Prothane MM
|