[ttocs]

this will be easy then. If you could find a link to the wiring schematic for that bluetooth kit I can get you through it. The pics you sent me had 3-4 hrns's in them, two small black square ones and two larger rectangular ones. Ignore the little ones and look closely at the larger rectangular hrns's. One will have 8 pins in it(and was probably plugged into another hrns, black I think), and one will have 5-7 pins in it. The black 8 pin harness(I point to it on page 2 of my cardomain page) is the speaker wires that go between the tweeters and the front amp. You can confirm this if you want to by turning the stereo on and then disconnecting that harness and the tweeters will go out. The tweeters are a standard 4 ohm impedence so the motorola unit should not have any problems playing though them. The bluetooth kits have a relay that will turn off the music to the speaker and then play the phone call through it so you can just use the front drivers side to make wiring easy. The only problem I see with this is that the stock stereo does not have a cell phone mute to quiet the stereo when you get a call, we might be able to wire another relay to turn off the sub amps to help.