a little mustang vs ls1 bench racing
Looking for some opinions, as i have no real idea as to what these cars might run...
these will be roll runs, prob 20-30 mph ish
1995 Mustang GT, 347 stroker, AFR 185cc heads, tfs cam and 100-150 shot of nitrous
2003 Cobra Kenne Bell @ 580 rwhp
2003 cobra 2.73 pulley, x pipe, catback, intake and 75 shot
my Ls1 traps around 130 in the 1/4th as a rule on my 100 shot.... i am probably going to up the shot to a 150
discuss
these will be roll runs, prob 20-30 mph ish
1995 Mustang GT, 347 stroker, AFR 185cc heads, tfs cam and 100-150 shot of nitrous
2003 Cobra Kenne Bell @ 580 rwhp
2003 cobra 2.73 pulley, x pipe, catback, intake and 75 shot
my Ls1 traps around 130 in the 1/4th as a rule on my 100 shot.... i am probably going to up the shot to a 150
discuss
That sounds like a traction war to me. Very hard to form an opinion on this one. I'd like to here some opinions on this 347 with spray. I have zero experience what-so-ever with a that kind of set up.
In street trim (17 inch C5 corvette wheels with MT's out back) i trap 127, on the 100 shot. With the track wheels and tires i trap a bit higher. I am thinking on the 150 shot i am going to be 130+ in street trim which is what i would be running (i made the mistake of driving on my welds and i bent one of the draglight fronts
) My setup is a cam, stock unported heads, FAST intake, full exhaust and HSW/NOS nitrous setup. I think the best run would be the KB and the termi on spray?.. more input is welcome
) My setup is a cam, stock unported heads, FAST intake, full exhaust and HSW/NOS nitrous setup. I think the best run would be the KB and the termi on spray?.. more input is welcome


