lets hear some opinions

my mods are udp's,lca's,uca's,built auto tranny stock torque converter,lakewood shocks and struts,no front sway bar,no strut tower brace,rear shock tower brace,m/t drag radials,4:10's,subframes,t/b,plenum,bbk shorty headers,o/r x-pipe and flowmasters,bigger maf and a cai,intake manifold and a intake manifold spacer.


him= everything i have except he has longtubes,slicks,15x4 and 15x10in wheels,4:56's,heads,cam,back seat removed, and hes a manual with spec 2 clutch and a short throw shifter

 

Any idea about which heads and cams he has?

 

comp stage one cam i think the heads are also stage one comp

 

He'll no doubt stick it to you from a dig with those gears and slicks. I'm not sure about the top end with that H/C combo though. I'm thinking other than him launching his *** off, that'll it will be a decent race.

 

I think up top he would win too, when I did my HCI swap I noticed a huge improvment on the top end of my car

This should probably be in the bench racing section, I'm sure one of the mods will move it there soon

Race him and get a video of it

 

i think hell kick my *** on take off....if i launch i might stand a chance but i spin bad if i launch to hard....o well i guess we'll see tommorrow

 

My buddy has a 95 Cobra with HCI, full bolt ons, and 3.73's. He puts down a little over 300 hp to the wheels. We've raced dozens of times (my mods and #'s in sig) and he is only slightly faster. I mean he might have 1 car length by 120 mph.

With that being said, i think he'll get you from a dig for sure, and a little bit from a roll.

 

With you're list of mods, it looks like you are capable of a pretty nasty launch. Are your tires about shot or something?

 

nope there basically new mickey thompson drag radials maybe 5 very small burnouts..

 

What gives man? They should hook, especially with your other suspension mods on a low stall.