so i have the stock intake a 70mmthrottle body and maf calibrated to 24s that i didnt put on yet and a fpr for that. but i wanted to do an e cam while it was all off. is there anything else i would need besides the cam?
thanks seth

 

you should at least go with some nice rockers, pushrods and springs.. i'm running an e cam and i just broke a valve spring on my trickflow heads.. so if you still have stock heads definatly upgrade those a little... just to be safe

 

cam swap = spring swap and a cam with stock heads is a waste

 

Your best bet is atleat GT40/GT40P heads with good spring, 1.6 roller rockers and a Corba/Explorer intake then run the E-cam or a TFS stage 1. We will be more then happy with that and the parts you already have!!

PS I have some 1.6 rockers if you need them.

 

definitely not worth doing a cam with stock heads, unless you have a Cobra.

 

how 'bout no to the e-cam, for cryin' out loud how many e-craptastic cam thread do we need around here???

 

OKAY NO NEED TO BITCH AT ME MAN. GO YELL AT SOMEONE WHO CARES!!!! a$$

 

that is a fantastic way to get people to help you. he has every right to be mad because had you done a search before asking your question you would have seen at least 10 threads in the last 2 weeks come up about swapping in an ecam

 

how 'bout I give you an infraction for insulting me with profanity, I expect an apology or an infraction will result,you have until midnight est. thank you and your welcome oh and FYI who is the one yelling????? do you see me writing in caps and using exclamation points??? huh?? didn't think so, I'll be waiting

 

<3 Mjr. But yeah use the search function, most of the time has everything you need to know.