removing the ford emblem?
aka 'Negative Nancy'
Joined: Jul 2007
Posts: 4,839
From: Ohio
hair dryer
3m sticker remover
fishing line (if youre real pro, you can take a flat head screw driver and put a piece of electrical tape around the tip to protect the paint and lightly peel up the corner to get it off...i dont advise this unless you know what youre doing)
3m sticker remover
fishing line (if youre real pro, you can take a flat head screw driver and put a piece of electrical tape around the tip to protect the paint and lightly peel up the corner to get it off...i dont advise this unless you know what youre doing)
Thread Starter
4th Gear Member
Joined: Mar 2008
Posts: 1,977
From: Atlanta
hair dryer
3m sticker remover
fishing line (if youre real pro, you can take a flat head screw driver and put a piece of electrical tape around the tip to protect the paint and lightly peel up the corner to get it off...i dont advise this unless you know what youre doing)
assuming its a hard plastic piece like a badge...
if its just a sticker, 3m sticker remover, hair dryer, and a microfiber cloth if its just too stuck
i just peeled mine off with my fingernail
no badge or sticker will ever remove paint
3m sticker remover
fishing line (if youre real pro, you can take a flat head screw driver and put a piece of electrical tape around the tip to protect the paint and lightly peel up the corner to get it off...i dont advise this unless you know what youre doing)
assuming its a hard plastic piece like a badge...
if its just a sticker, 3m sticker remover, hair dryer, and a microfiber cloth if its just too stuck
i just peeled mine off with my fingernail
no badge or sticker will ever remove paint
Sorry, had a long day, I missed the screwdriver idea and thought you were talking about just one of the adhesive badges. Thanks for the idea.
6th Gear Member
Joined: Oct 2006
Posts: 6,817
From: NJ
dont dig into the decklid when trying to pry the emblem off...
ex: do not use the decklid as leverage to push against when trying to pryer off the emblem...
it's just fiberglass, you can crack it
idk what method to use, but if you wait another week, my emblem should be comin off and i can tell you how mine was taken off... im getting the holes filled and the decklid painted black
ex: do not use the decklid as leverage to push against when trying to pryer off the emblem...
it's just fiberglass, you can crack it
idk what method to use, but if you wait another week, my emblem should be comin off and i can tell you how mine was taken off... im getting the holes filled and the decklid painted black
aka 'Negative Nancy'
Joined: Jul 2007
Posts: 4,839
From: Ohio
you shouldnt pry against the decklid or fenders or anything...thats how dents and scratches and stuff happen, or cracks on fiberglass
just pry very carefully, if youre not confident enough to do it that way, fishing line will work
i tried dental floss because i didnt have fishing line and it did alright, kept shredding though...thats when i switched to a flathead
just pry very carefully, if youre not confident enough to do it that way, fishing line will work
i tried dental floss because i didnt have fishing line and it did alright, kept shredding though...thats when i switched to a flathead
4th Gear Member
Joined: Apr 2009
Posts: 1,250
From: Cleveland, TN
I have a wave in my rear bumper as well. As does almost every other 99-04 that I see. Mine just popped up a couple months ago at about 58k
aka 'Negative Nancy'
Joined: Jul 2007
Posts: 4,839
From: Ohio
i traded my gt bumper for this v6 bumper at night time and didnt notice...im gonna try heating it up and setting some bricks on it to smash it back out...if all else fails ill buy one of those ebay bumpers with the mustang lettering filled in (v6 still...no cut outs for me)
5th Gear Member
Joined: Oct 2003
Posts: 2,010
From: Northern Wisconsin
Last edited by BlackMage; Oct 7, 2009 at 10:38 AM.
Joined: May 2009
Posts: 21
From: Florida
99BlackPonyGT is 100% correct. I took off all three of my GT emblems with a hair dryer and dental floss in about 20 minutes. I would def suggest using fishing line if you are going to go through with it, it will prob cut your time in half.