Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine and Powertrain
- Ford Mustang V6 1994-2004: How to Replace Serpentine Belt
Step by step instructions for do-it-yourself repairs.
Browse all: Engine and Powertrain
How to change serpentine belt?
#1
How to change serpentine belt?
Hey, I looked everywhere for a "how to" to replace serpentine belt and was unsuccessful, will somebody tell me how to replace the serpenting belt or possibly find a "how to" article?
Thanks in advance and I drive a 07 Mustang GT
Thanks in advance and I drive a 07 Mustang GT
#2
#6
Thanks guys! and 6+6,nice drawing skills haha but how do i loosen the serpentine belt,it says rotate the accessory drive belt tensioner,what is that?
Last edited by lil_sixer; 12-24-2010 at 02:05 AM.
#7
LOL.....Thanks .....on my drawing...see that square piece, at the end of that is a round part, you have a 3/8 or 1/2 inch hole a ratchet end will fit in and you push down, need like a breaker bar, they sell a actual one , but I used a breaker bar 18" long. couple pics taken from different angles, see the square slot where rachet goes in?
Last edited by 6+6 Stang; 12-24-2010 at 06:28 AM.
#8
Put a big ratchet on the tensioner and pull/push it till the belt slacks alittle and you can slip it off.
Put new belt on in same fashion, then pull/push tensioner again so you can slip the belt onto it.
There is a diagram on your engine catalyst for this aswell
Put new belt on in same fashion, then pull/push tensioner again so you can slip the belt onto it.
There is a diagram on your engine catalyst for this aswell