Tech articles and how to's (Updated Often)
10-26-2006, 02:32 PM
#1
Administrator
Thread Starter
Join Date: Dec 2003
Location: Southern California
Posts: 25,949
Tech articles and how to's (Updated Often)
Hey guys!
Planning on installing that new t/b plenum this weekend? Or how about a catback or X-pipe? Underdrive pulleys? Anything? Chin Spoiler?
Make sure you take picutres of the installation process and do a technical, thorough writeup and submit to me via PM ANY Site Moderator and if it makes muster, the Admins might be so kind as to bless you with a contributor tag!
It's not that hard to do and we're trying to expand our tech "How To's" and who better than the members to do them!
Thanks all!
Acer & Staff
This arrangement of tech articles was provided by Acer2428 & Edited by Site Moderators.
Thanks Everyone. [sm=smiley20.gif]
How to: Tint your head lights and tail lights
How to: Install HIDs
Bad Boys of the 4.6 Section
Rides of the 4.6 Section
Texas Hot Rods 2v In the 12's On a Budget, With Videos
Watch Before Posting
Brake configurations with Bullit Wheels
Moving Rear Spoiler Back on 99-00 Mustang
5 Components To a 12 sec N/A 99-04 GT
Basic Info/ FAQ
Bolt On dyno testing
Mustang Suspension Information
N/A Cobra vs. GT Differences?
Mach 1 Grill Delete Part #
Methanol Injection Facts
Gas Mileage
Does Your 4.6 stall/die at idle or cruising speed?
Spark Plug Info
Modular Motors and Lifters: No
97 Cobra Engine Rebuild
Camshafts?
4V Head Info
T-45, 3650: Manual Transmissions
( See also T-45 to T-3650 Swap How To!)
TKO 500/600/T56 Swap Information
THE Gear Thread
Basic Bolt-Ons
Tuner Info
Dyno Expectations and Advice
What Octane do I need?
The Ins-n-Outs Of Lowering Your Stang
( See also Basic Suspension Install How To)
Throttle Body and Plenum Comparisons
96-98 PI Headswap Info
4.6 Exhaust Sound Clips
Gear Calculator
Plastic Intake Lawsuit Info
Tire and Wheel Size Calculator
Mustang Trouble Codes
Interesting facts about injectors, by 01Steed
03-04 Cobra bumper swapFAQs
How To: Air Silencer Removal
How To: Changing Your Spark Plugs
How To: Gas Pedal Mod
How To: JLT Cold Air Installation
How To: Throttle Body and Plenum Install
How To: Aftermarket Shifter Install
How To: T-45 to T-3650 Swap
How To: Cobra Brake Swap
How To: Speed Cal Install
How To: Electronic Gauge Install (99-04)
How To: SLP LineLock Install
How To: Basic Suspension Install
How To: Underdrive Pulley Install
How To: IAC Rev Mod (Fixing hanging RPMS)
How To: Make Mach/Bullitt guages work in a GT
How To: Make your own MIL's
How To: Window Repair
How To: Paint Interior Trim
How To: Wash your engine bay
HowTo: Installing a Raptor Shift Light
How to: Program a PATS key
COP info
How To: Degree modular cams
RETURN STYLE FUEL SYSTEMS EXPLAINED
OFFICIAL SUSPENSION GUIDE
T-3650 ~ T-56 swap with complete instructions
How to save your Bullitt wheels from the scrap pile
Turbos: Myth's Uncovered
BUILD YOUR COBRA BRAKE KIT
How To: UPR Coil Over Install WITH PICS
HOW-TO: ProCharger P-1SC Rebuild
HOW-TO: Shut Off Seat Belt Warning
HOW TO: BUILD YOUR OWN ENGINE 56K beware
HOW TO: Upgrade brakes
How To: Re-Build Vortech Supercharger
How To: Slow Down Sequential Tail Light Rate
"calibrated" MAFs...
Planning on installing that new t/b plenum this weekend? Or how about a catback or X-pipe? Underdrive pulleys? Anything? Chin Spoiler?
Make sure you take picutres of the installation process and do a technical, thorough writeup and submit to me via PM ANY Site Moderator and if it makes muster, the Admins might be so kind as to bless you with a contributor tag!
It's not that hard to do and we're trying to expand our tech "How To's" and who better than the members to do them!
Thanks all!
Acer & Staff
This arrangement of tech articles was provided by Acer2428 & Edited by Site Moderators.
Thanks Everyone. [sm=smiley20.gif]
How to: Tint your head lights and tail lights
How to: Install HIDs
Bad Boys of the 4.6 Section
Rides of the 4.6 Section
Texas Hot Rods 2v In the 12's On a Budget, With Videos
Watch Before Posting
Brake configurations with Bullit Wheels
Moving Rear Spoiler Back on 99-00 Mustang
5 Components To a 12 sec N/A 99-04 GT
Basic Info/ FAQ
Bolt On dyno testing
Mustang Suspension Information
N/A Cobra vs. GT Differences?
Mach 1 Grill Delete Part #
Methanol Injection Facts
Gas Mileage
Does Your 4.6 stall/die at idle or cruising speed?
Spark Plug Info
Modular Motors and Lifters: No
97 Cobra Engine Rebuild
Camshafts?
4V Head Info
T-45, 3650: Manual Transmissions
( See also T-45 to T-3650 Swap How To!)
TKO 500/600/T56 Swap Information
THE Gear Thread
Basic Bolt-Ons
Tuner Info
Dyno Expectations and Advice
What Octane do I need?
The Ins-n-Outs Of Lowering Your Stang
( See also Basic Suspension Install How To)
Throttle Body and Plenum Comparisons
96-98 PI Headswap Info
4.6 Exhaust Sound Clips
Gear Calculator
Plastic Intake Lawsuit Info
Tire and Wheel Size Calculator
Mustang Trouble Codes
Interesting facts about injectors, by 01Steed
03-04 Cobra bumper swapFAQs
How To: Air Silencer Removal
How To: Changing Your Spark Plugs
How To: Gas Pedal Mod
How To: JLT Cold Air Installation
How To: Throttle Body and Plenum Install
How To: Aftermarket Shifter Install
How To: T-45 to T-3650 Swap
How To: Cobra Brake Swap
How To: Speed Cal Install
How To: Electronic Gauge Install (99-04)
How To: SLP LineLock Install
How To: Basic Suspension Install
How To: Underdrive Pulley Install
How To: IAC Rev Mod (Fixing hanging RPMS)
How To: Make Mach/Bullitt guages work in a GT
How To: Make your own MIL's
How To: Window Repair
How To: Paint Interior Trim
How To: Wash your engine bay
HowTo: Installing a Raptor Shift Light
How to: Program a PATS key
COP info
How To: Degree modular cams
RETURN STYLE FUEL SYSTEMS EXPLAINED
OFFICIAL SUSPENSION GUIDE
T-3650 ~ T-56 swap with complete instructions
How to save your Bullitt wheels from the scrap pile
Turbos: Myth's Uncovered
BUILD YOUR COBRA BRAKE KIT
How To: UPR Coil Over Install WITH PICS
HOW-TO: ProCharger P-1SC Rebuild
HOW-TO: Shut Off Seat Belt Warning
HOW TO: BUILD YOUR OWN ENGINE 56K beware
HOW TO: Upgrade brakes
How To: Re-Build Vortech Supercharger
How To: Slow Down Sequential Tail Light Rate
"calibrated" MAFs...
Last edited by Acer2428; 06-09-2011 at 01:45 PM.
03-03-2009, 11:23 AM
#2
Underboss
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Courtesy of BlackMage
Mustang Replacement Floor Carpet (94-04)
http://www.americanmuscle.com/replac...4-install.html
Mustang Replacement Floor Carpet (94-04)
http://www.americanmuscle.com/replac...4-install.html
05-24-2009, 07:07 AM
#3
Underboss
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
09-06-2011, 05:21 PM
#6
Join Date: Jul 2011
Location: TN
Posts: 15
Another "How-To" - fog light rewiring
If anyone is interested, I figured out how to rewire the fog lights on my 97 GT so they work through the regular switch and relay independent of the headlights. I'll walk you through how I did it if you want to know.
01-08-2012, 01:41 AM
#7
Join Date: Jan 2012
Location: Georgia
Posts: 3
98 4.6 litre swap over to 2001 4.6 litre PI
What componets have to be changed over if any so a 2001 4.6 litre PI can be installed in place of a 98 4.6 litre in a 98 GT Mustang? The PI came out of 2001 GT convertible with automatic transmission. The 98 is a 5 speed. Is anything custom or special in order to do the engine swap?
05-24-2012, 09:11 PM
#9
2nd Gear Member
Join Date: May 2009
Location: New York
Posts: 476
