sunpro air fuel gauge DIY pod for great lateral looks on mustang 69
#1
sunpro air fuel gauge DIY pod for great lateral looks on mustang 69
I was going to cancel the radio or AC with a panel and install the sunpro gauge
but I found a nice way to install it on my stang
I used the screw from the steering colum to hold the gauge plate
2 1/2 inch nut one to give desired height and the other one to tight the plate
black paint can cap for the pod
drilled the stud holes and a hole for the wires
the cap can hold the gauge just fine so you wont need the aluminum holder
with this option you can install a second gauge on the other side with out the oddy looks "aluminum stud and white plastic"
this is not for a resto mod IMO but for me this works just fine
but I found a nice way to install it on my stang
I used the screw from the steering colum to hold the gauge plate
2 1/2 inch nut one to give desired height and the other one to tight the plate
black paint can cap for the pod
drilled the stud holes and a hole for the wires
the cap can hold the gauge just fine so you wont need the aluminum holder
with this option you can install a second gauge on the other side with out the oddy looks "aluminum stud and white plastic"
this is not for a resto mod IMO but for me this works just fine
Last edited by juit; 04-19-2013 at 08:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
HIS S-197
4.0L V6 Technical Discussions
1
08-10-2015 05:47 PM