View Single Post
Old 04-28-2013, 07:18 PM   #2
2nd Gear Member
Join Date: Aug 2012
Vehicle: 2000 Ford, Mustang GT
Location: MS
Posts: 464

You'll have to drop the driveshaft, and drain the Trans, and/or just put a catch pan under either way.Its called the rear extension housing seal. Pry the old one out with a seal puller or screwdriver. Replace the seal square to the extension housing bore with a socket which should be slightly smaller than the outside diameter of the seal, tap with rubber mallet til flush. Reassemble and check fluid level and done.
Seabee1993 is offline   Reply With Quote