Snapped Steeda Sport Spring
#1
Snapped Steeda Sport Spring
I figured this warranted its own thread, since apparently snapped springs aren't so common.
Here's the original thread
If you were too lazy to click the link, here's what happened:
I parked in the grass for a Greek Week event (I'm in a fraternity) on Friday. When I parked, I wasn't going though the grass at any speed whatsoever (feathering the clutch, and I parked probably three feet off the pavement). There weren't any bumps and I didn't bottom out. I swear I have absolutely no idea how it happened, but when I got in the car and started to move, I heard a really loud popping/grinding noise. I thought my front bumper was caught on something so I got out and looked, but I was in the clear. I drove home and the noise wouldn't go away. I got out of my car and now that I was on level pavement I could see the problem...my left front fender was sitting pretty much on the wheel itself.
I figured it was a busted shock, and I didn't want to drive it. I ended up calling a tow company and having it towed to the body shop. We get it off the wrecker and I leave it at the shop (a brother's dad owned the shop). They let me know that they would call me when they got it on the lift and got it checked out.
About an hour later, I get a call and the guy told me that our original prediction of a busted shock was incorrect...I had busted a spring. I couldn't believe it. He told me that it wasn't a crack, it was a clean break, all the way through.
Passenger's side spring (with Steeda/Steeda part # visible):
Now for the carnage...
I just want to clarify that I'm not trying to throw Steeda under the bus in any way. I love their products. I just want get this out there because this is potentially a very, very dangerous thing. I don't know what would have happened if this had occurred while I had been going down the interstate at eighty miles an hour. I don't know if it was this spring that had bad metal or if it was an entire batch. I think I'm going to end up replacing all four of my springs just to be safe. The previous owner had them put on, but the car only has 71,000 miles on it, so it's not like fatigue should have taken hold. I've never taken it to the track, so it's not like that would be the reason. I avoid every pothole on the highway if possible, and I take speedbumps at literally 2 miles an hour. I don't have any idea what caused this.
So yeah, surprising day.
Here's the original thread
If you were too lazy to click the link, here's what happened:
I parked in the grass for a Greek Week event (I'm in a fraternity) on Friday. When I parked, I wasn't going though the grass at any speed whatsoever (feathering the clutch, and I parked probably three feet off the pavement). There weren't any bumps and I didn't bottom out. I swear I have absolutely no idea how it happened, but when I got in the car and started to move, I heard a really loud popping/grinding noise. I thought my front bumper was caught on something so I got out and looked, but I was in the clear. I drove home and the noise wouldn't go away. I got out of my car and now that I was on level pavement I could see the problem...my left front fender was sitting pretty much on the wheel itself.
I figured it was a busted shock, and I didn't want to drive it. I ended up calling a tow company and having it towed to the body shop. We get it off the wrecker and I leave it at the shop (a brother's dad owned the shop). They let me know that they would call me when they got it on the lift and got it checked out.
About an hour later, I get a call and the guy told me that our original prediction of a busted shock was incorrect...I had busted a spring. I couldn't believe it. He told me that it wasn't a crack, it was a clean break, all the way through.
Passenger's side spring (with Steeda/Steeda part # visible):
Now for the carnage...
I just want to clarify that I'm not trying to throw Steeda under the bus in any way. I love their products. I just want get this out there because this is potentially a very, very dangerous thing. I don't know what would have happened if this had occurred while I had been going down the interstate at eighty miles an hour. I don't know if it was this spring that had bad metal or if it was an entire batch. I think I'm going to end up replacing all four of my springs just to be safe. The previous owner had them put on, but the car only has 71,000 miles on it, so it's not like fatigue should have taken hold. I've never taken it to the track, so it's not like that would be the reason. I avoid every pothole on the highway if possible, and I take speedbumps at literally 2 miles an hour. I don't have any idea what caused this.
So yeah, surprising day.
#3
#6
Buy a lotto ticket! Steeda Sports are made by two suppliers. Judging by the 016 # on your spring, I'm assuming your sports are the 555-8216 springs. I have the 555-8215 version of the sports, and as far as I know, they are made by Hyperco. I believe, but could be wrong that Steeda 8216's are made by Eibach to Steeda specs. Both makers build high quality springs so I don't think Steeda is responsible for a spring failure. Springs can fail for many reasons, so it makes sense to determine the actual cause of the failure before throwing stones. BTW you mentioned you drove it off road when you drove on the grass, warranty void! (just kidding).
#7
Something looks off to me. Is there is a rough end and a chunk missing where the end of the spring should be as well as the break on the first coil? Does the lower break look old and dirty compared to the new one?
#8
damn i have sports, im scared now.. if this happened at 100+ mph... could be a total disaster. What dampers do you have? They look stock.. Wonder if the springs could be overworked somehow from weak dampers? doesnt really make sense though, the dampers should be the thing thats overworked...
Last edited by Andy13186; 04-30-2013 at 08:48 AM.
#9
I am wondering if the spring wasn't installed correctly, it looks like it may have been installed with the end of the spring sitting up on top and not in the dropped down section. If that was the case then it could put a lot of stress on the spring to bend to compensate for the change in angle having the end of the spring in the wrong position would cause. Not saying that IS what happened, but that COULD have happened.
#10
Dang, that sucks. I don't blame Steeda but it would be really cool of them to step up and get you another set. Hope you get it worked out OP.
One part failing does not make a trend, these things happen.
damn i have sports, im scared now.. if this happened at 100+ mph... could be a total disaster. What dampers do you have? They look stock.. Wonder if the springs could be overworked somehow from weak dampers? doesnt really make sense though, the dampers should be the thing thats overworked...