Need a dual 12" subwoofer enclosure for my 03 cobra, what will fit?
#1
Need a dual 12" subwoofer enclosure for my 03 cobra, what will fit?
So I was measuring inside my trunk and I'm not sure how to get a dual 12" sub box to fit. I have the stock shaker 460 system, and It seems to take up some of the head room a box would need. I found a box that I want and the dimensions fit other than the height, which is 16-9/10". Is there a way to remove the shaker pod to fit the box I want, or should I search for a new enclosure? How tall of a box can you fit without the shaker stuff? Thanks
#3
#4
what are the specs of the box (Volume, port dims (length/diameter, bandpass class of the enclosure type 1, 2, 3, etc) and what are the sub specs you are considering? By sub specs I mean
SPL(DB) (aka Sensitivity)
FS(HZ) (recommended crossover frequency)
QTS
VAS(CUFT)
MOUNTING DEPTH
OVERALL DEPTH
A decent sub will provide these specs.
There's more science to bass than just throwing some speakers in a box...
SPL(DB) (aka Sensitivity)
FS(HZ) (recommended crossover frequency)
QTS
VAS(CUFT)
MOUNTING DEPTH
OVERALL DEPTH
A decent sub will provide these specs.
There's more science to bass than just throwing some speakers in a box...
#5
what are the specs of the box (Volume, port dims (length/diameter, bandpass class of the enclosure type 1, 2, 3, etc) and what are the sub specs you are considering? By sub specs I mean
SPL(DB) (aka Sensitivity)
FS(HZ) (recommended crossover frequency)
QTS
VAS(CUFT)
MOUNTING DEPTH
OVERALL DEPTH
A decent sub will provide these specs.
There's more science to bass than just throwing some speakers in a box...
SPL(DB) (aka Sensitivity)
FS(HZ) (recommended crossover frequency)
QTS
VAS(CUFT)
MOUNTING DEPTH
OVERALL DEPTH
A decent sub will provide these specs.
There's more science to bass than just throwing some speakers in a box...
Box
Height 16-9/10"
Width 17-9/10"
Depth 34-7/8"
Weight 66.9 pounds
Cut-out size 11-1/4"
Number of Cut-outs 2
Cubic Feet of Air Space per Woofer 1.15 cu. ft.
Box Design Ported
Subwoofer Capacity (size and number) 12 x 2
Shape Wedge
Connection Type Spring-loaded terminals
Construction Material 3/4" MDF
the sub
Handles up to 1400W maximum power (400W nominal)
20-220Hz frequency response
94dB±1.5dB sensitivity , 2 Ohm Impedence
12" seamless IMPP composite cone
4-layer voice coil, double stacked magnets
Height 8"
Width 14-1/2"
Depth 14-1/2"
Weight 12.7 pounds
Subwoofer Size 12"
Woofer Composition IMPP Composite Cone
Woofer Surround Polymer
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM