View Single Post
Old 07-15-2013, 03:03 PM   #2
MustangFirstCar
5th Gear Member

 
MustangFirstCar's Avatar
 
Join Date: May 2010
Vehicle: 2006 White Mustang
Location: Ohio
Posts: 2,229
Default

You might not be able to just lay the trip over the scoop if that's what your implying. I imagine there would be a gap that would get filled with water and dirt and would bubble up. Also if the stripes are wider than the scoop you would have to cover the sides of the scoop with the stripe too, which would take material away from the part of the stripe on the hood, making it appear thinner. You'd have to apply the stripe to the hood and cut out the area where the scoop will go, then take a separate piece of stripe and wrap the scoop before putting it on the hood.
__________________

2006 Mustang V6 PP | C&L CAI | Bama 93 race tune | 14" Shorty Antenna | Eagle GTs | 18" stripe
GT/CS Front Bumper | Bullit Grille | Hawk HPS pads| Slotted and Drilled Rotors | Strano Swaybars
Prothane Motor Mounts | MMD Hood Struts | 55w 5000K HIDs | Poly Bushings


There is no dark side of the moon really. Matter of fact, it's all dark.
MustangFirstCar is offline   Reply With Quote