When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have scuffed up the lower black portion of my front bumper pretty bad on one side. It is the black part that juts out a bit just in front of the wheel. It appears to be one piece that goes from one side to the other. It is part number 17A989 on the attached diagram. What I want to know is how difficult it is to replace. Also, there is painted portion at the bottom. Is the painted part a separate piece or will I have to have that section painted onto the part I need? If it is two separate pieces, I would assume it is an easy fix. Finally, are there any screws, clips, etc. I need to also order?
Not a big deal to remove the front bumpers on our cars. A few screws and a couple tabs that snap together and you will have it laying on the driveway in no time. Easy directoins are online.
They should have them at Napa, Oreilly, etc. they will be all of $.30 a piece, but you've got to have the. The entire process is really easy though, don't let it intimidate you. Take your time.